Specification
Identification no.
- No. 2: With 3 socket cap screws ISO 4762
Connector clamp
Stainless steel AISI CF-8 NI
Matte shot-blasted
Socket cap screws ISO 4762
Stainless steel
Information
The clamping bores of the two-way connector clamps GN 131.3 are designed for typical construction tubes. The square sections s1 and s2 also allow bars or tubes with a square cross-section to be clamped.
At the screw locations z1 and z2, socket cap screws reduce the bore cross-section for clamping. The split clamping point z2 allows the connector clamp to be subsequently inserted into an existing structure and facilitates assembly when axial sliding is not possible, e.g., due to tight bending radii.
