Close
GN 843.1-NI
GN 843.1
Push-pull type toggle clamps
78711-R,20
78710-R,10
78712-R,50
orGN 300-30-B5-SW;60
GN 612-5-M12x1,5-A;40
DIN 172-B10,5-20-A;50
ISO 8675-M8x1-04-BT;10
78711-R,20
78710-R,10
78712-R,50
orGN 300-30-B5-SW;60
GN 612-5-M12x1,5-A;40
DIN 172-B10,5-20-A;50
ISO 8675-M8x1-04-BT;10
Parts in sheet metal
Case-hardened Steel C10
zinc plated, blue passivated
All moving parts
lubricated with special grease
Hand grip
High quality, oil resistant red plastic
All moving parts
lubricated with special grease
Hand grip
High quality, oil resistant red plastic
GN 843.1 push-pull type toggle clamps can be mounted on a mounting bracket (Type ASW) or directly on the jig.
The center bushing securing method allows the operating handle to be turned to the most favorable position.
GN 843.1 push-pull type toggle clamps replace series GN 843.
Your request was sent and will be answered as fast as possible.