Specification
Types
- Type APV: Clamping arm with slotted hole, with two flanged washers
- Type CPV: Clamping arm with slotted hole, with two flanged washers and clamping screw GN 708.1
- Type EPV: Clamping arm with bushing
Coding
- Coding M: Magnetic piston
Tensioning mechanism
Steel
- Base phosphate-treated
- Bearing pins / Bearing bushings
- Double-action air cylinder
- with adjustable end position damping
- Max. pressure 6 bar
- Lubricated with special grease
Flanged washers GN 898 for type APV / CPV
Steel
Zinc plated, blue passivated
Clamping screws GN 708.1 for type CPV
- Steel, zinc plated, blue passivated
- Thrust pad
- Hardness 85 Shore A ≈
- Vulcanized
- Black
- Type A (flat pressure area)
Information
Toggle clamps „Longlife“ GN 962 are equipped with a reinforced body and hardened and ground bearing pins / bushings. This makes them suitable for applications in which substantial forces arise and a long service life is required.
To ensure an extended life of the mechanical parts as well as the pneumatic cylinder, the operating pressure should not exceed 6 bar. In addition, a compressed-air control unit should be mounted in the air intake line.
Toggle clamps GN 962 are equipped with a magnetic piston as standard. This makes end position detection possible in connection with sensors GN 3380.
Security Information
The information in the operating instruction must be observed during installation, initial operation, and use. It is enclosed with the product and is provided digitally on the product page at elesa-ganter.com.
