Information
Toggle clamps GN 820.5 are securely locked while in the clamped position to prevent release by accident or due to vibrations. To release the clamp, the lock is disengaged with a single-handed operation.
Clamping is based on the toggle lever principle, with the clamping lever and clamping arm moving in opposite directions. The mounting surface, rotated by 90°, allows for compact installation next to the clamping point. The low overall height in the clamped position is another distinguishing feature of these clamps.
Toggle clamps with forked clamping arm of type MFL accommodate an application-specific screw via two flanged washers. A clamping screw with rubber thrust pad is additionall included with type MFLC.
